Product Catalogue Cleaning Chemicals Plastic Safe Graffiti Remover Aerosol
PDFPrintE-mail

Plastic Safe Graffiti Remover Aerosol

Ideal for enclosed spaces and shelters. Safe on plastics, laminates and polycarbonates. Removes adhesive labels. A new generation of graffiti remover which intelligently removes paint off a painted surface.
SKU: AS146

SELECTIVE GRAFFITI REMOVER
K175
.
Plastic Safe graffiti remover for solvent sensitive surfaces .
   
description Ideal for enclosed spaces and shelters. Safe on plastics, laminates and polycarbonates. Removes adhesive labels.
A new generation of graffiti remover which intelligently removes paint off a painted surface. Different types of paint, such as car paint, powder coated paint and gloss paints are chemically different to aerosol spray paints used by vandals. Plastic Safe is formulated to break up aerosol spray paint (without dissolving it) but will not attack the oleo-resinous, polyurethane or powder coated substrate. Also, the product will not attack common plastics including polycarbonate, it has been extensively tested on the Glasdon® range of bins and shelters. Though Selden cannot comment on the environment impact of the graffiti, this Plastic Safe Graffiti Remover has an exceptionally good environmental profile. Does not contain either acids or caustics.
       
application Compatibility: Polyethylene (HD & LD) ✓ Polypropylene ✓ Nylon 66 ✓ UPVC ✓ Bare metals ✓ Powder coated paint ✓ Oleo-resinous paint ✓ Polyurethane paint ✓ Polycarbonate ✓ Polystyrene ✕ (can cause cracking) Varnished wood ✕ (some varnishes will be removed) Reflective signs ✕ (removes the paint) Acrylics (both paints & plastics) ✕ (will remove acrylics) Spray paint & linemarking paint ✕ (will remove the paint) Fabrics e.g. cloth, carpet ✕ (possible run from fabric dye)
   
directions Spray product evenly across graffiti. Leave for 10-60 minutes (more porous surfaces require longer). To prevent bleeding or ghosting the best technique for removal is pressure washing with water. Alternatively, scrape carefully with a soft spatula to avoid damaging the underlying paint or plastic. On nonporous surfaces the graffiti can be wiped off with a paper towel. On more sensitive surfaces, ensure product is fully removed after treatment to prevent any long term discolouration.
   
   
   
   
Technical  
  Composition   A blend of plastic safe glycol ether solvents, surfactants and thickeners
  Appearance   Hazy gel
  Colour   Colourless
  Density   0.83
  Fragrance   Glycol ether
  Stability   Two years minimum
       
Biodegradability All surfactants contained in Selden Products meet the requirements of the EU Detergent Directive 2005 – 2004/648/EC. This requires all surfactants to break down both quickly and completely into harmless material such as CO2 and water.
       
Storage Pressurised container. Store out of direct sunlight. Temperature must not exceed 50oC
   
Aerosol Information
  Propellant   Hydrocarbon
  Pressure   40 psi
  Spray Rate   2.0 grams per second
       
       
 
Product is for professional use only.
There are yet no reviews for this product.
Please log in to write a review.

Recently Viewed Products

1/2m x 3/4m BSP adaptor  (Category:  High Pressure Couplings )
1/2m x 3/4m BSP adaptor

3/8m x 3/8m BSP adaptor  (Category:  High Pressure Couplings )
3/8m x 3/8m BSP adaptor

1/8m x 1/8m BSP adaptor  (Category:  High Pressure Couplings )
1/8m x 1/8m BSP adaptor

Interpump 54/57 Series  (Category:  High Pressure Interpump Pumps )
* Flow rates 7.6 to 15 Lpm * Pressures 70 to 200 Bar * Speeds 1450 - 3600 Rpm * Choice of drive shaft & flanges * Brass or aluminium manifold * 3/4" Female drive shaft

Nilfisk - Alto FLOORTEC 350 B  (Category:  Nilfisk Alto Products )
FLOORTEC 350 Walk Behind 720mm Traction Sweeper FLOORTEC 350 is the ideal solution for small to medium sized cleaning jobs like service stations, small parking lots, school yards, small factories and small warehouses.